Help
Cart 0

How do i reset my ooze pen?

How do i reset my ooze pen?

How do i reset my ooze vape pen?

If you're having trouble with your ooze pen, don't worry - this article will walk you through the steps necessary to reset it.

If you have an Ooze Twist 2.0 battery or original Ooze Twist battery, press the button five times fast in two seconds, without stopping between clicks. If your battery is on, pressing the button will illuminate a light around the button and power the atomizer. 

Whether your pen isn't working properly or you just want to start fresh, follow the instructions below and you'll be back to using your pen in no time.

 

Ooze Slim Pen TWIST Battery w/Smart USB Charger

 

How to troubleshoot your ooze pen

If you're having trouble with your ooze pen, there are a few things you can try to reset it.

First, make sure that the pen is turned on by pressing the button on the side. If the light doesn't come on, the pen may be out of battery and will need to be charged.

Once the pen is turned on, lightly press the tip of the pen against a piece of paper to see if any ink comes out.

If no ink comes out, the pen may be clogged and will need to be cleaned.

To clean the pen, remove the tip and soak it in warm water for a few minutes.

Once the tip is soaked, use a paperclip or similar object to clear any debris from the tip.

Afterwards, try pressing the tip against paper again to see if ink comes out. If you're still having trouble with your ooze pen, contact customer support for assistance.

Is your ooze pen on?

If your ooze pen is on, then you can easily reset it by following these steps:

  1. Remove the cartridge from the battery.
  2. Unscrew the mouthpiece from the cartridge.
  3. Use a paperclip or similar object to press the reset button on the side of the cartridge (it's usually red or white).
  4. Replace the mouthpiece and screw it back on.
  5. Reinsert the cartridge into the battery.

If your ooze pen is still not working after resetting it, then you may need to replace the battery or cartridge.


Is your connection perfectly clean?

If you're getting a "no atomizer" error message or your cartridge isn't firing, the first thing you should check is whether or not the coil is making a connection.

Is your connection perfectly clean?

To do this, remove the cartridge from the battery and unscrew the mouthpiece.

Then, use a multimeter to check for continuity between the two terminals on the coil. If there is no continuity, then the coil needs to be replaced.

Is the battery damaged?

If your Ooze pen is not working properly, it may be due to a damaged battery.

In this case, you will need to replace the battery. To do this, first remove the old battery from the pen.

Next, insert the new battery into the pen and screw on the cap. Finally, turn on the pen and test it out.

How to reset your ooze pen

If your Ooze pen is not working properly, it may be necessary to reset the device. Here are the steps to follow:

  1. Unscrew the cap from the pen and remove the cartridge.
  2. Remove the battery from the pen.
  3. Screw the cap back on to the pen.
  4. Wait 30 seconds, then screw the cartridge back into the pen.
  5. Replace the battery in the pen and screw on the cap.
  6. Press the button on the side of the pen 5 times to turn on/off. The LED light will blink 3 times when turned on/off successfully.

Why you should reset your ooze pen

If you're using an ooze pen, it's important to reset it on a regular basis.

Resetting the wax pen will clear the pen's memory and help prevent any issues with the pen's performance. Here's how to reset your ooze pen:

1. Turn off the pen and unplug it from the power source.

2. Remove the cartridge from the pen.

3. Use a paperclip or other sharp object to press and hold the reset button for three seconds.

4. Replace the cartridge and turn on the pen. Your ooze pen is now reset!

How to avoid your ooze pen from not working

If you're like most people, you've probably had your share of issues with your ooze pen.

Whether it's not working properly, or just not working at all, it can be frustrating.

Here are a few tips on how to avoid having these problems:

  • Make sure the dry herb pen is turned on and the battery is charged.
  • If the pen isn't working, check the cartridge to make sure there is ink in it.
  • Clean the nib of the pen with a soft cloth to remove any dried ink.
  • If the pen still isn't working, try resetting it by turning it off and then on again.
  • If none of these tips work, then you may need to replace the cartridge or get a new ooze pen altogether.

Don't overcharge your ooze pen battery

If you're using an ooze pen with a cartridge, it's important not to overcharge the battery.

Doing so can cause the oil to leak out of the cartridge and make a mess.

When you're done using your pen, make sure to unplug it and allow the battery to cool down before storing it away.

Conclusion

If you're having trouble with your Ooze pen, don't worry — it's easy to reset. Just follow the steps below and you'll be back up and running in no time.

 



Older Post Newer Post


  • Zachary Mangeris on

    My ooze pen keeps flashing red won’t change settings or turn on or off


Leave a comment

Please note, comments must be approved before they are published

View Latest Blog Posts:

Post Tags:

Product Categories: